Forums LFJR

Réponses: 6 Pages: 1

Tommy Bell

Sound... hmm should work.. but isnt
Publié: 7 juil. 2002 00:12

Répondre

Hello,

i recently dug out my TA commanders edition after seeing a game at a
friends.. and one of the things I really like is the music in it.. but for
some reason, there is no music played even if i start it myself,
by hitting F2, and going to the music menu and hit the play button > -
nothing happens..

any ideas - or did i just screw up..

Thanks for any Help..

--
And Shepherds we shall be.
For thee, my Lord, for thee.
Power hath descended forth
from Thy hand, that our feet
may swiftly carry out Thy
command. So we shall flow a
river forth to Thee and teeming
with souls shall it ever be.
E Nomini Patri, E Fili,
E Spiritu Sancti.
* Prayer from The BoonDock Saints

Invité

Re: Sound... hmm should work.. but isnt
Publié: 7 juil. 2002 18:25

Répondre

Tommy Bell

Re: Sound... hmm should work.. but isnt
Publié: 7 juil. 2002 18:25

Répondre

thanks shonner, but that is basicly what I already did,
now I am wondering, i have a soundblaster live digaltal 5.1 - now I can
listen to music cds via my CD rom drive, but I was wondering,f wether or not
it mattered if i have an AUX cable, on it, instead of a digital, i use a CD
burner to run my game, since i my normal CDrom is broken

Cheers

--
And Shepherds we shall be.
For thee, my Lord, for thee.
Power hath descended forth
from Thy hand, that our feet
may swiftly carry out Thy
command. So we shall flow a
river forth to Thee and teeming
with souls shall it ever be.
E Nomini Patri, E Fili,
E Spiritu Sancti.
* Prayer from The BoonDock Saints

"SHONNER" <shonner@hotmail.com> wrote in message
news:3d279f4d$1_2@news.vic.com...
> I usually double-click my Volume icon and crank up the CD Audio all the
way
> up. I also make sure that the CD-ROM I'm running TA on is also my CD
Audio
> drive (which is E: for me).
>
>
> SHONNER
> http://www.shonner.com
>
> "Tommy Bell" <icon_master@events.dk> wrote in message
> news:3d276b62$0$41315$edfadb0f@dspool01.news.tele.dk...
> > Hello,
> >
> > i recently dug out my TA commanders edition after seeing a game at a
> > friends.. and one of the things I really like is the music in it.. but
for
> > some reason, there is no music played even if i start it myself,
> > by hitting F2, and going to the music menu and hit the play button > -
> > nothing happens..
> >
> > any ideas - or did i just screw up..
> >
> > Thanks for any Help..
>
>

Iguana Bwana

Re: Sound... hmm should work.. but isnt
Publié: 7 juil. 2002 23:15

Répondre

On Sun, 7 Jul 2002 00:12:16 +0200, "Tommy Bell"
<icon_master@events.dk> wrote:

>any ideas - or did i just screw up.

Several.

Check the following.

1. Check firstly for the obvious. Check volume levels set and sources
enabled in Windows Play Control & whichever sound card control you are
running.

2. TA CD is in drive which is Win assigned and enabled as your *music*
source, AND the drive *audio* out is physically connected, AND the
connection source selected, ie: drive letter AND digital vs analogue,
is the one used.

The most common reasons for the music not to be heard are either the
source is muted or deselected in Creative's SBLive! et al master
control app, or digital or analogue is mis-selected with the either or
neither being physically connected.

If you're using a SBLive! for sound, configure and assign a TA launch
macro with AutoEA, which of course you'll have to enable, and the
problem won't occur again.

- Iguana Bwana

Tommy Bell

Re: Sound... hmm should work.. but isnt
Publié: 7 juil. 2002 23:43

Répondre

Shonner I didnt use that, maybe that is the problem, ill just change it and
see if i can ge it to work.. if i can.. then yes.. and thank you if not..
then im still screwed heh..
will just try that

ok Iguana Bwana, that was one long and good solution you had there..

but just one problem,

> If you're using a SBLive! for sound, configure and assign a TA launch
> macro with AutoEA, which of course you'll have to enable, and the
> problem won't occur again.
>

how in the sam hell do i do that ?

Cheers
"Iguana Bwana" <Iguana_Bwana@hotmail.com> wrote in message
news:62bhiuorgtfhpk9u4jd95tfsumb0dt6su7@4ax.com...
> On Sun, 7 Jul 2002 00:12:16 +0200, "Tommy Bell"
> <icon_master@events.dk> wrote:
>
> >any ideas - or did i just screw up.
>
> Several.
>
> Check the following.
>
> 1. Check firstly for the obvious. Check volume levels set and sources
> enabled in Windows Play Control & whichever sound card control you are
> running.
>
> 2. TA CD is in drive which is Win assigned and enabled as your *music*
> source, AND the drive *audio* out is physically connected, AND the
> connection source selected, ie: drive letter AND digital vs analogue,
> is the one used.
>
> The most common reasons for the music not to be heard are either the
> source is muted or deselected in Creative's SBLive! et al master
> control app, or digital or analogue is mis-selected with the either or
> neither being physically connected.
>
> If you're using a SBLive! for sound, configure and assign a TA launch
> macro with AutoEA, which of course you'll have to enable, and the
> problem won't occur again.
>
> - Iguana Bwana

Iguana Bwana

Re: Sound... hmm should work.. but isnt
Publié: 8 juil. 2002 00:46

Répondre

On Sun, 7 Jul 2002 23:43:10 +0200, "Tommy Bell"
<icon_master@events.dk> wrote:

>> If you're using a SBLive! for sound, configure and assign a TA launch
>> macro with AutoEA, which of course you'll have to enable, and the
>> problem won't occur again.
>>
>
>how in the sam hell do i do that ?

You'll have to install or have already installed the Creative Liveware
that came with your sound card. AutoEA (or they might have renamed it
for the SB DD5.1) is an integrated app which comes with it.

Do a search for "audiohq.exe" and launch it. You should be able to
select AutoEA and configure it from within there. It's fairly
intuitive, but if you can't figure it out, as when all else fails read
the help file.

It'll just be an AutoEA and SB mixer environment
(select speaker from the same iconic window menu) config issue.

GL.

- Iguana Bwana.

Tommy Bell

Re: Sound... hmm should work.. but isnt
Publié: 8 juil. 2002 00:53

Répondre

well thanks for the explanation, but what shonner suggested worked.. i
plugged it into the wrong port - silly me heh.. well thanks anyway

"Iguana Bwana" <Iguana_Bwana@hotmail.com> wrote in message
news:lkghiusg6m6jm3j4vugf638a9ej5ncafdq@4ax.com...
> On Sun, 7 Jul 2002 23:43:10 +0200, "Tommy Bell"
> <icon_master@events.dk> wrote:
>
> >> If you're using a SBLive! for sound, configure and assign a TA launch
> >> macro with AutoEA, which of course you'll have to enable, and the
> >> problem won't occur again.
> >>
> >
> >how in the sam hell do i do that ?
>
> You'll have to install or have already installed the Creative Liveware
> that came with your sound card. AutoEA (or they might have renamed it
> for the SB DD5.1) is an integrated app which comes with it.
>
> Do a search for "audiohq.exe" and launch it. You should be able to
> select AutoEA and configure it from within there. It's fairly
> intuitive, but if you can't figure it out, as when all else fails read
> the help file.

It'll just be an AutoEA and SB mixer environment
> (select speaker from the same iconic window menu) config issue.
>
> GL.
>
> - Iguana Bwana.